Alliance Comfort Services

Heating installation in Raleigh, NC

The first decision is not which brand. It is which kind of machine, and in this state that is a real question rather than a formality. Heating installation in Raleigh, NC starts by settling it, and a licensed North Carolina contractor will work through it with you on the phone.

Call (919) 510-1472

Heat pump, furnace, or both

Roughly four in ten North Carolina homes are heated by a heat pump and about half have a furnace, according to the EIA's 2020 residential energy survey. Both are ordinary here, which is why this is worth thinking about rather than defaulting to whatever came out.

  • A heat pump

    For it: One machine heats and cools, so replacing it replaces both halves of your system at once. It is already the most common answer in this state, so parts and people who know it are everywhere.

    Against it: It delivers heat at a lower supply temperature than a furnace, over longer run times. Some people who grew up with gas find that air feels cool at the vent even when the house is at temperature.

  • A gas furnace

    For it: Hotter air at the vent and heat that does not care how cold it gets outside. If you already have gas at the house and the venting is sound, replacing like with like is usually the least disruptive job.

    Against it: It heats and does nothing else, so you still need an air conditioner beside it, and both have their own lifespan. If there is no gas at the property already, bringing it in changes the project entirely.

  • Dual fuel, both

    For it: A heat pump carries the mild majority of a Triangle winter and the furnace takes the coldest nights. It is the configuration that suits this climate best on paper.

    Against it: Two pieces of equipment, two things to maintain, and a changeover point that has to be set correctly or you pay for the wrong one to run. It also fails quietly: the gas side can quit while the house stays warm.

Tell us what is in the house now and what it has been doing, and you will get an opinion rather than a catalog.

Call (919) 510-1472Or request a quote

The thing most people do not realize until somebody says it

If you replace a gas furnace with a heat pump, you have also replaced your air conditioner. They are the same machine running in two directions, so one purchase covers both halves of the system and one lifespan replaces two.

That changes the comparison people usually make. It is not the price of a furnace against the price of a heat pump. It is the price of a furnace plus an air conditioner, on their own separate clocks, against one box that does both.

Which also means the reverse is worth checking. If your air conditioner is old and your furnace is the thing that just failed, replacing them separately a few years apart usually costs more in total than doing it once. Ask what shape the other half is in before you decide.

Once the kind is settled

The specifics differ by equipment and each has its own page, because the things that make a quote hold or grow on installation day are not the same for the two.

For gas, it is the venting, the gas supply, the combustion air, and whether a modern condensing furnace can use what the old one used. That is furnace installation in Raleigh.

For a heat pump, it is sizing against the heating load rather than the cooling one, and how much electric backup heat the house actually needs. That is heat pump installation.

What moves the price on any replacement, and how to tell a repair from a replacement in the first place, is worked through on AC installation and replacement, because the cooling side of the same decision is where that framework lives. If the system is simply broken and the question is not replacement at all, start at heating repair.

Who quotes it, and who installs it

Alliance Comfort Services LLC is licensed in North Carolina, number L.34059, through the NC State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors, covering Heating Group 2 Contractor and Heating Group 3 - Class I Contractor. The licensed contractor who works through the decision with you is the one who sizes the system and installs it.

That matters more on a replacement than on any other job, because the reasoning behind the size is the part that is easiest to skip and hardest to check afterwards. Financing is available and we go through it on the call.

What the job actually involves

  1. You reach the licensed contractor

    The person who picks up is the person who will quote the job, so the conversation about what you have now and what has been wrong with it happens once.

  2. Somebody looks at the house, not at a form

    What is installed now, where it sits, the ductwork it connects to, the electrical panel, the gas supply if there is one, and the rooms that have never been comfortable.

  3. The load calculation, then the options in writing

    The size comes from the house rather than from what was there before, which was not necessarily right. You get the equipment named and the work spelled out, and you can hold that next to anyone else you are talking to.

  4. Installation, then commissioning

    The old system out, the new one in and matched, airflow set, and the system tested in the mode you will actually need first.

Common questions

My furnace died. Do I have to replace it with a furnace?
No, and it is worth asking the question while the decision is open. Replacing a furnace with a heat pump also replaces your air conditioner, because they are the same machine, so the comparison is not furnace against heat pump. It is furnace plus air conditioner against one box.
Is a heat pump enough on its own for a Raleigh winter?
For most houses here, yes. This is a transition climate rather than a cold one, and roughly four in ten homes in North Carolina already heat this way. Whether yours is one of them depends on the house, which is what the load calculation is for.
Can you replace just the outdoor unit and keep the indoor one?
Sometimes, and it is usually a false economy. The indoor and outdoor halves are matched as a pair for a reason, and a mismatched set does not deliver what either half was rated for. If yours is the rare case where it makes sense, we will tell you.
How long does the job take?
A straightforward changeout onto sound ductwork is usually a single day. Duct work, electrical work, gas work, or a change of system type extends it, and you will know the scope before anything starts.

What customers say

5.0 out of 5, from 25 reviews on Google

Read all 25 on Google

Replacing a heating system in Raleigh?

Say what is in the house now and what it has been doing, and the choice usually settles itself in one conversation. Everything we cover in Raleigh is on one page.

Call (919) 510-1472
Call (919) 510-1472Schedule service
Schedule service